TrakHandle Sport Handle Upgrade

Upgrade and personalize your TrakHandle Sport grips with these custom built handles.

These feature aggressive knurling, a selection of colors, and your own custom text. 

These come in two versions. One uses the OEM bronze bushings reused from your original handles. The other version uses a R8 ball bearings for an even smoother action.

The grip diameter is 32mm.

Mix and match colors for your handle and your end-caps.

Specify your custom text for the end caps. If no custom text is specified, the end caps will read, "APERTURE".

SOLD AS A PAIR

Both versions include:
(2) Handles
(4) End Caps

The Ball Bearing version also includes:
(4) R8 Ball Bearings

Installation:

1. Remove the end cap screws (2). The end cap will slide off along the cable.

2, Push the retaining pin out to release the U-shaped piece holding the cable.

3. With the pin removed, you can now remove the inner cap. You can now slide the handle off the main shaft.

4. You will find two bronze bushings inside of the ends of the OEM handle. Save these to reuse if you have the Bushing version of our handles. You won't need them if you have the Ball Bearing version.

5. (Bushing version only) Insert the OEM bushings into your new handles. If you have the Bearing version, just make sure the bearings are inserted inside the new handle.

6. Slide the new handle onto the main shaft.

7. Slide the inner cap back on.
 

8. Slide the pin back in, then put the end cap back on. The end cap will trap the pin in place.

9. You're done! Enjoy your new handles.